Tales of the Jointed Track

Railroading my career from September 15th,1972 thru September 5th. 2012

This is my first attempt of writing down my thoughts. I have been asked or have been suggested that I do by my Co-workers or others that know me. This will be about railroading throughout my career, first starting out in the Roundhouse and then changing railroads and going into engine service, which I finally retired from in September of 2012 forty years.
I hired out with the Burlington Northern in September of 1972. I was called by the General Roundhouse Foreman, one week before my hire date. “Do you still want this job”…”yes Sir” I told him. He said come down get physical papers , get that done see the clerk and you’ll be a Midnight Machinist helper. “Okay” I told him… I was working at a bakery for a major Grocery chain, in Denver at the time… also on midnights so not a big difference. I got up went to the Railroad physician and took my 5 minute physical. Returned to the shops and turned in the paperwork. “When can you start?”…I need to give notice and I will firm up with you. I gave my notice to the bakery and started a week later on nights ..
I introduced myself to the night Roundhouse Foreman.. Taylor Gregg....mid to late sixties …skinny as a rail…and always wore his hard hat cocked at at angle..and always started the night out at the coffee vending machine… ready to delegate the nights task. You’ll work with Sandy Ortiz .. we have a bunch of Goats that need Federal inspection and repair… ( a Goat is a slang term for a switch engine ) ..
I entered my midnight shift as a Machinist Helper, working with Sandy. He was Hispanic ..( didn’t care that he was ) and elderly, about early to mid sixties. He had terrible arthritis and shuffled when he walked… I always wondered why a man of his age, worked nights ? He had the seniority to work days, or really any shift he wanted. But as I continued to work for the railroad, there are those that prefer nights, Night Fighters they were called.
The Diesel shop had a Three stalls or tracks in the main shop… The old roundhouse stalls were west of that location but “did” join up… Line one was the running track for inbound inspection and minor maintained. After units were fueled, they came into line one, line one had another exit on the other end of the shop and the track extended out toward the depot. That track was the “Buck Main” that line one connected to. On line one units had cooling water added as needed, Lube oil, compressor oil, and someone went underneath and checked the Traction Motor suspension bearings for lubrication levels. Also the gear cases were looked at and “Crater Bags” were added as needed to provide lubrication to the gear cases. These were bags of heavy grease in a plastic casing that broke down after meshing with the pinion and spur gears. During the winter they were kept in a warm water bath to stay supple. I always said when these were hard you could kill someone with it…like a blackjack .. plus if they were like that they would jam the gearing and slide the wheels or drivers of the locomotive.
Line two was a run through track in the shop, and connected to line on about 300 feet west. this was an inspection maintenance , track…
Line three…well that where Amtrak had units that laid over and it was stubbed.. Old early FP-7 FP-9 E-8 and E-9 a and B units… They were from all railroads, and the US government bought em… some were really trash…I’ll elaborate on that later : ) … We also performed general maintenance and certain Federal inspections as needed…If heavy repairs of a big inspection was needed they went to one of the older roundhouse stalls and remained till completed.
Sandy and I were assigned a SW12 switcher for completion. The second trick, ( afternoon shift ) did the diesel engine requirements and the electricians did their electrical cabinet, auxilliary generator and main generator work. We were to complete the bottom end… Brakeshoes, truck maintaince, suspension bearings, lube the cooling fan bearings..and check or replace cooling fan belts, air compressor, lube the center bowls ( where the trucks meet the carbody of the unit ) and change out and air brake or air equipment not done and and filters not changed out or replaced.
We finished off the inspection and started on another…after lunch that was completed as well and they were “carded off” and ready for service. Sandy had me do the heavy work, and I will always be greatfull because I learned and I still remember to this day, and it served me well when I went into engine service.